Concrete Calculation SuiteLast reviewed: November 2026

Concrete Calculator Yards

The Concrete Calculator Yards is a bulk ordering tool for scheduling ready-mix transit mixer deliveries from commercial batch plants. It converts measurements into cubic yards, applies recommended 10% overage margins for ground excavation irregularities, and calculates the number of 8, 9, or 10 cubic yard truckloads required for the pour.

Key facts:
  • A 16 × 40 ft RV pad needs 13.25 cubic yards to order, or 2 truckloads.
  • Always order 10% extra for uneven ground and spillage.
  • Transit mixers carry 8, 9 or 10 cubic yards per load.
  • Concrete starts setting in about 90 minutes — have the crew ready before the truck arrives.

Loading calculator…

Amounts in your selected currency (USD). Enter values in USD — no exchange-rate conversion is applied.

Share or Export Current Results

Share Concrete Calculator Yards directly or copy link to clipboard

TwitterLinkedInFacebookWhatsApp

Calculation Formula & Mathematical Engine

Theoretical equation governing this computation.

V_{\text{yards}} = \frac{L \times W \times (T / 12)}{27} \times \left(1 + \frac{\text{Waste}\%}{100}\right)

Variable Definitions

V_yardsVolume in cubic yards rounded to the nearest 0.25 or 0.5 yard increment
Truckload CapacityStandard ready-mix transit mixer carries 8.0 to 10.0 cubic yards per trip
Short LoadOrders under 4 to 5 cubic yards typically incur a supplier surcharge

Step-by-Step Calculation Example

Ordering Ready-Mix for a 16ft × 40ft RV Parking Pad

Scenario: A homeowner is pouring a 16ft × 40ft parking pad for an RV at a heavy-duty 6-inch thickness.
Length40.0 feet
Width16.0 feet
Thickness6.0 inches (0.50 ft)
Waste Margin10%
Execution Steps
  1. 1Calculate cubic feet: 40 × 16 × 0.50 = 320 cubic feet
  2. 2Convert to cubic yards: 320 / 27 = 11.85 cubic yards
  3. 3Add 10% safety overage: 11.85 × 1.10 = 13.04 cubic yards
  4. 4Round for batch plant dispatch: 13.00 to 13.25 cubic yards
  5. 5Determine truckloads (assuming 9 yd³ trucks): 1 full 9.0 yd³ truck + 1 partial 4.25 yd³ truck
Final Verified Output:13.25 Cubic Yards to Order (2 Transit Mixer Trucks)

How to order ready-mix concrete

Follow these steps to get your result.

  1. 1Measure the length, width and thickness of the pour in feet and inches.
  2. 2Enter the size to convert the volume to cubic yards.
  3. 3Add the 10% overage for uneven ground and spillage.
  4. 4Divide the order by the truck size (8, 9 or 10 cubic yards) to get the number of trucks.
  5. 5Book the pour so the crew and forms are ready before the first truck arrives.

Comprehensive Practical Guide

In-depth analysis, domain guidelines, standard practices, and common pitfalls.

Why You Must Always Order 10% Extra Concrete

Running short on a ready-mix pour is costly. If the truck runs out before the forms are filled, the delivered concrete begins setting, creating a weak, unsightly "cold joint" where the next batch is placed. Ordering an extra 10% accounts for subgrade variations, form deflection under fluid pressure, and minor spillage.

What Happens During Concrete Dispatch and Unloading

Ready-mix batch plants allow 5 to 7 minutes of unloading time per cubic yard. If unloading exceeds this window due to wheelbarrow bottlenecks or site delays, drivers charge waiting time fees of $2 to $4 per minute.

Frequently Asked Questions About Concrete Calculator Yards

Direct, verified answers to common calculation and methodology questions.

There are exactly 27 cubic feet in one cubic yard (3 ft × 3 ft × 3 ft = 27 ft³).
Authoritative Sources & Data References:
  • ASTM C94 / C94M Standard Specification for Ready-Mixed Concrete
  • National Ready Mixed Concrete Association (NRMCA)

Disclaimer: Verify access road clearance and overhead branch clearance (minimum 14ft height) for ready-mix trucks.