Construction & Home ImprovementLast reviewed: November 2026

RV Solar Power Output Estimator

A 1,200 Wh daily load needs a 400 W solar array where worst-month sun is 4 hours a day. Enter your loads or panel watts and sun hours, and the estimator sizes the array, battery bank in amp-hours, days of autonomy and the charge controller.

Key facts:
  • Size the array for worst-month sun hours, not the yearly average.
  • A 400 W array makes about 1,200 Wh a day at 4 sun hours and 75% system efficiency.
  • LiFePO4 batteries can use 80% of their capacity; lead-acid only about 50%.
  • A 400 W array on a 12 V bank needs a controller rated for 42 A — buy a 50 A MPPT controller.

How this tool differs: This page sizes a complete RV off-grid system — array, battery, controller and days of autonomy — from daily power use. The solar panel string calculator sizes series strings for a fixed inverter, working out how many panels fit one MPPT channel without exceeding its voltage limit.

Loading calculator…

Share or Export Current Results

Share RV Solar Power Output Estimator directly or copy link to clipboard

TwitterLinkedInFacebookWhatsApp

Calculation Formula & Mathematical Engine

Theoretical equation governing this computation.

Array_W = \frac{DailyWh}{SunHours \times 0.75}, \quad Battery_{Ah} = \frac{DailyWh}{12 \times DoD}

Variable Definitions

DailyWhTotal daily energy use in watt-hours, from load presets or your own loads
SunHoursWorst-month peak sun hours per day at your location
Array_WSolar array size in watts, after 25% system losses
DoDUsable depth of discharge: 0.80 for LiFePO4, 0.50 for lead-acid

Step-by-Step Calculation Example

Sizing a 400 W RV Array for a 1,200 Wh Daily Load

Scenario: An RVer uses 1,200 Wh a day (fridge, lights, fan and devices) and camps where the worst month gives 4 peak sun hours a day, on a 12 V system.
Daily Load1,200 Wh
Worst-Month Sun4 hours/day
System Efficiency75%
Battery Voltage12 V
Execution Steps
  1. 1Array size: 1,200 ÷ (4 × 0.75) = 400 W
  2. 2Panels: one 400 W panel, or two 200 W panels
  3. 3Battery LiFePO4 (80% DoD): 1,200 ÷ 12 ÷ 0.80 = 125 Ah
  4. 4Battery lead-acid (50% DoD): 1,200 ÷ 12 ÷ 0.50 = 200 Ah
  5. 5Controller: 400 ÷ 12 × 1.25 safety margin = 41.7 A → 42 A required, so buy a 50 A MPPT controller
  6. 6Autonomy with a 200 Ah LiFePO4 bank: 200 × 12 × 0.80 = 1,920 Wh ÷ 1,200 = 1.6 days
Final Verified Output:400 W Array | 125 Ah LiFePO4 (or 200 Ah Lead-Acid) | 42 A Required (50 A MPPT) | 1.6 Days Autonomy

Comprehensive Practical Guide

In-depth analysis, domain guidelines, standard practices, and common pitfalls.

How Many Solar Watts Does an RV Need?

Add up everything you run in a day in watt-hours, then divide by your sun hours times 0.75 for system losses. A 1,200 Wh daily load in 4 sun hours needs 1,200 ÷ (4 × 0.75) = 400 W of panels. Start from the load presets — fridge, lights, fan, water pump, phones and laptops — rather than guessing the array size.

Why Size for the Worst Month, Not the Average?

Yearly average sun hours flatter the result: a site with 5 average hours may give only 3 to 4 in December. Sizing to the average leaves the batteries short all winter, when you need power most. Size to the worst month, and the summer surplus is a bonus, not a shortfall.

LiFePO4 vs Lead-Acid: How Battery Chemistry Changes the Size?

A LiFePO4 battery can safely use 80% of its rated capacity, while a lead-acid battery should only use about 50% if you want it to last. The same 1,200 Wh load needs 125 Ah of LiFePO4 but 200 Ah of lead-acid. Lithium also charges faster and weighs about half as much per usable amp-hour.

What Size Charge Controller Do I Need?

Divide the array watts by the battery voltage, add a 25% safety margin, and round up to the next standard MPPT size: 400 W ÷ 12 V × 1.25 = 41.7 A, so the controller must handle 42 A — buy a 50 A MPPT controller. MPPT controllers also harvest 20 to 30% more energy than PWM controllers when panel voltage is well above battery voltage.

Tilt, Portable Panels, Alternator and Shore Power

Tilting roof panels toward the winter sun adds meaningful output in the cold months, and a portable panel can chase the sun when the roof is shaded. On cloudy stretches, a DC-DC charger tops the house bank up from the alternator while driving, and shore power covers the gap through the converter or inverter-charger.

Frequently Asked Questions About RV Solar Power Output Estimator

Direct, verified answers to common calculation and methodology questions.

A 12 V compressor fridge uses about 400 to 600 Wh a day, which needs roughly 150 to 200 W of panels in 4 sun hours.
Authoritative Sources & Data References:
  • National Electrical Code (NFPA 70: NEC Article 690)
  • Renogy — RV Solar Sizing Guide
  • Victron Energy — MPPT Charge Controller Sizing Guidance

Disclaimer: Off-grid solar sizing is an estimate; verify wire, fuse and controller ratings with a qualified RV electrician before installing.