Technical & Financial Calculation Engines
Fence Calculator
The Fence Calculator generates a complete bill of materials for privacy and picket fences. Enter your property perimeter to get an itemized count of 4x4 treated posts, 2x4 stringer rails, dog-ear pickets and rapid-set post concrete — including gate deductions and the extra boards that board-on-board and shadowbox styles need.
- A 150-ft privacy fence needs 20 posts, 57 rails, 345 pickets and 40 bags of concrete.
- Use 3 rails on a 6-ft fence to stop pickets warping.
- Bury posts one-third of their height and below the frost line.
- Board-on-board needs about 50% more pickets; shadowbox needs about twice as many.
Loading calculator…
Calculation Formula & Mathematical Engine
Theoretical equation governing this computation.
Posts = \lceil L_{ft}/8 \rceil + 1, \quad Pickets = \frac{L_{ft} \times 12}{W_{picket} + Gap} \times 1.05Variable Definitions
Step-by-Step Calculation Example
Materials for a 150-Foot 6-Foot Privacy Fence
- 1Sections: 150 ÷ 8 = 19 sections (20 posts needed)
- 2Rails: 19 sections × 3 rails = 57 rails (2x4x8ft)
- 3Pickets: (150 × 12) ÷ 5.5 = 328 pickets (+5% = 345 pickets)
- 4Concrete: 20 posts × 2 bags = 40 bags (50-lb fast-setting)
How to Plan and Build a Fence
Follow these steps to get your result.
- 1Measure the total perimeter and mark where gates will go.
- 2Choose the fence style and picket gap — privacy, spaced picket, board-on-board or shadowbox.
- 3Enter the perimeter, style and height to get the posts, rails, pickets and concrete count.
- 4Call 811 before digging, then set posts one-third buried and below the frost line.
- 5Attach rails and pickets, and fit heavier gate posts with hinges and a latch at each opening.
Comprehensive Practical Guide
In-depth analysis, domain guidelines, standard practices, and common pitfalls.
Setting Fence Posts Below Regional Frost Lines
Fence posts must be buried to at least 1/3 of their total height (and below local frost depth, typically 36" to 42" in northern climates) to prevent winter frost heaving.
Privacy, Spaced Picket, Board-on-Board or Shadowbox: How Style Changes the Count
Privacy fences butt pickets edge to edge, so the count is the fence length divided by the picket width. A spaced picket fence adds the gap to the width: pickets = (length × 12) ÷ (picket width + gap), so a 2-inch gap on 5.5-inch pickets uses about a quarter fewer boards than privacy. Board-on-board overlaps each picket over the next and needs roughly 50% more boards, while a shadowbox fence puts pickets on both sides of the rails and needs about twice the boards of a single-sided fence.
How Do Gates Change the Materials Count?
Deduct the gate opening from the picket run before counting boards: a 4-ft walk gate removes 4 ft of pickets and one rail span, but adds two heavier gate posts (6×6 is standard), hinges and a latch. A 10- to 12-ft drive gate needs the same treatment plus a diagonal brace and a drop rod. Measure each gate opening separately rather than guessing it from the total perimeter.
Frequently Asked Questions About Fence Calculator
Direct, verified answers to common calculation and methodology questions.
Related Calculators
Explore complementary tools and related mathematical engines.
Tree Removal Cost Calculator
Estimate arboricultural tree removal costs based on tree height, trunk diameter, hazards, stump grinding, and hauling.
Bag Concrete Calculator
Calculate pre-mixed concrete bags (40lb, 50lb, 60lb, 80lb) for fence post holes, deck footings, and minor flatwork.
Deck Board Calculator
Calculate composite and pressure-treated deck board counts, continuous rows, total linear footage, and hidden fastener screws.