Technical & Financial Calculation Engines
Drywall & Paint Coverage Calculator
A 12 × 10 ft room with an 8 ft ceiling needs 17 drywall sheets and 3 gallons of paint for two coats. Enter your room size, ceiling height and openings, and the calculator sizes 4 × 8 or 4 × 12 sheets, works out mud, tape, screws and primer, and totals the materials cost.
- A 4 × 8 ft drywall sheet covers 32 sq ft; a 4 × 12 ft sheet covers 48 sq ft.
- One gallon of paint covers about 350 sq ft per coat on smooth drywall.
- New drywall must be primed before painting, or the finish will look patchy.
- Doors and windows are deducted, so measure every opening before ordering.
Loading calculator…
Calculation Formula & Mathematical Engine
Theoretical equation governing this computation.
Sheets = \left\lceil \frac{Area_{gross}}{32} \times 1.10 \right\rceil, \quad Paint = \left\lceil \frac{Area_{net} \times Coats}{350} \right\rceilVariable Definitions
Step-by-Step Calculation Example
Drywall and Paint for a 12 × 10 Ft Room With an 8 Ft Ceiling
- 1Wall area: 2 × (12 + 10) × 8 = 352 sq ft
- 2Ceiling: 12 × 10 = 120 sq ft; openings: door 3 × 7 = 21 + window 3 × 5 = 15 → 36 sq ft
- 3Net area: 352 + 120 - 36 = 436 sq ft
- 4Sheets: 472 ÷ 32 = 14.75 → × 1.10 waste = 16.23 → 17 sheets (4 × 8). Openings are not deducted for sheets: the cut-outs become waste.
- 5Mud: 436 ÷ 100 = 4.36 gal → one 4.5-gal bucket; tape: one 250-ft roll; screws: 17 × 28 = 476 → one 500-count box
- 6Paint: 436 × 2 coats ÷ 350 = 2.49 → 3 gal; primer: 436 ÷ 350 = 1.25 → 2 gal
- 7Cost: 17 × $14 + 3 × $45 + 2 × $30 + $18 mud + $8 tape + $12 screws = $471
How to Measure a Room for Drywall and Paint
Follow these steps to get your result.
- 1Measure the length and width of the room and the ceiling height in feet.
- 2Measure every door and window opening and note its width and height.
- 3Decide whether the ceiling needs drywall and paint, and pick 4 × 8 or 4 × 12 sheets.
- 4Enter the measurements and the number of paint coats to get the full materials list.
- 5Buy the listed sheets, mud, tape, screws, primer and paint, plus 10% spare for cuts.
Comprehensive Practical Guide
In-depth analysis, domain guidelines, standard practices, and common pitfalls.
How Many Drywall Sheets Do I Need for a Room?
Measure the wall perimeter times the ceiling height, add the ceiling if you are covering it, and subtract every door and window opening. Divide the net square footage by 32 for 4 × 8 sheets (or 48 for 4 × 12 sheets) and add 10% for cutting waste, then round up to whole sheets.
How Much Paint Do I Need Per Coat?
One gallon of paint covers about 350 sq ft per coat on smooth drywall. Multiply the net wall and ceiling area by the number of coats, divide by 350, and round up to whole gallons. New drywall drinks paint, so budget for two coats plus one coat of primer, and allow 300 sq ft per gallon on textured surfaces.
Should I Include the Ceiling in the Drywall and Paint?
Include the ceiling if it is new drywall or needs repainting: in the worked example it adds 120 sq ft, which is nearly 4 extra sheets and a full gallon of paint. Use flat ceiling paint, which hides seams and roller marks better than the eggshell or satin used on walls.
Drywall Screws, Tape and Mud: What Else to Buy
Allow 28 screws per 4 × 8 sheet on studs 16 in apart, one 250-ft roll of joint tape per 500 sq ft, and about 1 gallon of joint compound per 100 sq ft of finished surface. Buy screws by the 500-count box: a 17-sheet room needs 476 screws, so one box covers it with spares.
Frequently Asked Questions About Drywall & Paint Coverage Calculator
Direct, verified answers to common calculation and methodology questions.
Related Calculators
Explore complementary tools and related mathematical engines.
Board and Batten Calculator
Plan accent walls with exact batten spacing, board counts, lumber footage, waste factor, and live SVG wall layout preview.
Home Renovation Calculator Free
Estimate remodeling budgets for kitchens, bathrooms, decks, and basements with cost-to-value return on investment (ROI).
Area Calculator
Calculate surface area for rectangles, triangles, circles, and trapezoids with instant conversion between sq ft, sq meters, acres, and hectares.